直流支撑电容器ESL仿真及影响因素研究

董晓亮; 邬泽宜; 陈德玲; 张研; 赵丹; 郝琳琳; 刘显博; 张铖铖

doi:10.14044/j.1674-1757.pcrpc.2026.04.004

您当前的位置：

首页 >

文章列表页 >

直流支撑电容器ESL仿真及影响因素研究

电力电容器与无功补偿 | 聚丙烯薄膜电容器全链条国产化关键技术

直流支撑电容器ESL仿真及影响因素研究
Study on ESL Simulation and Influencing Factors of DC-link Capacitors
新程（辽宁）电力电容器科技有限公司，辽宁营口 115007
内蒙古电力集团乌海供电公司，内蒙古乌海 016000
2026年47卷第4期页码：28-40
DOI：10.14044/j.1674-1757.pcrpc.2026.04.004
稿件说明：

移动端阅览

董晓亮, 邬泽宜, 陈德玲, 等. 直流支撑电容器ESL仿真及影响因素研究[J]. 电力电容器与无功补偿, 2026,47(4):28-40.

DONG Xiaoliang, WU Zeyi, CHEN Deling, et al. Study on ESL Simulation and Influencing Factors of DC-link Capacitors[J]. Power Capacitor & Reactive Power Compensation, 2026, 47(4): 28-40.
董晓亮, 邬泽宜, 陈德玲, 等. 直流支撑电容器ESL仿真及影响因素研究[J]. 电力电容器与无功补偿, 2026,47(4):28-40. DOI： 10.14044/j.1674-1757.pcrpc.2026.04.004.

DONG Xiaoliang, WU Zeyi, CHEN Deling, et al. Study on ESL Simulation and Influencing Factors of DC-link Capacitors[J]. Power Capacitor & Reactive Power Compensation, 2026, 47(4): 28-40. DOI： 10.14044/j.1674-1757.pcrpc.2026.04.004.

摘要

柔性直流支撑电容器是模块化多电平换流器（MMC）子模块中的关键储能元件，其等效串联电感（ESL）直接影响系统开关过电压与可靠性。本文以平面单块心子排列结构为研究对象，采用COMSOL Multiphysics建立整机电感仿真模型，系统研究了元件直径（并联数）、铜板厚度、薄膜宽度、电极结构形式及长高比五类关键因素对整机ESL的影响规律。研究表明：电极系统是整机ESL的绝对主导因素，贡献比达97.1%～98.3%，元件自身贡献不足3%；元件直径影响较小（增幅6.6%），铜板厚度从0.4 mm增至2.0 mm，ESL仅降低0.19%，铜板厚度影响不显著；薄膜宽度从150 mm减至60 mm降幅达44.5%，铜条+编织线结构ESL为整体铜板的1.20～1.63倍，长高比L/H从0.62增至2.57可降低ESL约75.7%。采用短路放电法对5个典型样品进行试验验证，仿真与试验最大相对误差不超过5.0%，验证了模型的有效性，为低电感直流支撑电容器的优化设计提供了系统性定量依据。

Abstract

VSC-HVDC-link capacitors are key energy storage components in sub-modules of modular multilevel converters (MMC)

and their equivalent series inductance (ESL) directly affects the system's switching overvoltage and reliability. In this paper

the planar single-cell core arrangement structure is taken as the study object and a integrated inductance simulation model using COMSOL Multiphysics is set up. The influence of such five key parameters as element diameter (number of parallel elements)

copper plate thickness

film width

electrode configuration

and length-to-height ratio on the overall ESL is systematically investigated. The study results show that the electrode system is the absolutely dominant factor in the overall ESL

contributing 97.1%~98.3%

while the contribution of the components themselves is less than 3%. The element diameter has a relatively minor effect (with increase of 6.6%). When the copper plate thickness is increased from 0.4mm to 2.0 mm

the ELS is decreased by only 0.19%

indicating that the effect of the copper plate thickness is not significant. The ELS is decreased by 44.5 when the film width is reduced from 150 mm to 60 mm. The copper strip with braided wire configurations exhibits an ESL 1.20~1.63 times higher than that of the solid copper plates. Moreover

increasing the aspect ratio ( L/H) from 0.62 to 2.57 yields

an ESL reduction of about 75.7%. The short circuit discharge method is used to experimentally validate five typical samples. The maximum relative error between simulations and measurement does not exceed 5.0%

which verifies the effectiveness of the model and provides a systematic quantitative basis for the optimal design of low inductance DC-link capacitors

关键词

Keywords

references

邹常跃,韦嵘晖,冯俊杰,等.柔性直流输电发展现状及应用前景[J].南方电网技术,2022,16(3):1-7.

ZOU Changyue,WEI Ronghui,FENG Junjie,et al. Development status and application prospect ofVSC-HVDC[J]. Southern Power System Technology,2022,16(3):1-7.

饶宏,周月宾,李巍巍,等.柔性直流输电技术的工程应用和发展展望[J].电力系统自动化,2023,47(1):1-11.

RAO Hong,ZHOU Yuebin,LI Weiwei,et al. Engineering application and development prospect ofVSC-HVDC transmission technology[J]. Automation of Electric Power Systems,2023,47(1):1-11.

刘钟淇,宋强,刘文华.基于模块化多电平变流器的轻型直流输电系统[J].电力系统自动化,2010,34(2):53-58.

LIU Zhongqi,SONG Qiang,LIU Wenhua. VSC-HVDC system based on modular multilevel converters[J]. Automation of Electric Power Systems,2010,34(2):53-58.

曹雨浩.固态变压器中模块化多电平变换器(MMC)控制策略研究[D].秦皇岛:燕山大学,2019.

徐政,肖晃庆,张哲任.模块化多电平换流器主回路参数设计[J].高电压技术,2015,41(8):2514-2527.

XU Zheng,XIAO Huangqing,ZHANG Zheren. Design of main circuit parameters of modular multilevel converters[J]. High Voltage Engineering,2015,41(8):2514-2527.

刘隽,贺之渊,何维国,等.基于模块化多电平变流器的柔性直流输电技术[J].电力与能源,2011,1(1):33-38.

LIU Juan,HE Zhiyuan,HE Weiguo,et al. The introduction of technology of HVDC based on modular multi-level converter[J]. Power and Energy,2011,1(1):33-38.

韦延方,卫志农,孙国强,等.适用于电压源换流器型高压直流输电的模块化多电平换流器最新研究进展[J].高电压技术,2012,38(5):1243-1252.

WEI Yanfang,WEI Zhinong,SUN Guoqiang,et al. New prospects of modular multilevel converter applied to voltage source converter high voltage direct current transmission[J]. High Voltage Engineering,2012,38(5):1243-1252.

文俊,殷威扬,温家良,等.高压直流输电系统换流器技术综述[J].南方电网技术,2015,9(2):16-24.

WEN Jun,YIN Weiyang,WEN Jialiang,et al. Review of converter technology for HVDC transmission systems[J]. Southern Power System Technology,2015,9(2):16-24.

张辰丰,栗保明.一种基于MMC拓扑的高压电容器充电电源设计[J].火炮发射与控制学报,2021,42(4):63-68.

ZHANG Chenfeng,LI Baoming. Design of a high-voltage capacitor charging power supply based on modular multi-level converter topology[J]. Journal of Gun Launch & Control,2021,42(4):63-68.

徐佳,杨树德,张新闻.一种提高变流器弱电网适应能力的加权阻尼策略[J].电测与仪表,2025,62(9):194-201.

XU Jia,YANG Shude,ZHANG Xinwen. A weighted damping strategy for improving the adaptability of converter to weak grid[J]. Electrical Measurement & Instrumentation, 2025,62(9):194-201.

耿治.模块化多电平变换器电容电压均衡控制与容错运行策略研究[D].北京:华北电力大学,2023.

姚骏,谭义,裴金鑫,等.模块化多电平变流器高压直流输电系统直流故障改进控制策略[J].电工技术学报, 2018,33(14):3306-3318.

YAO Jun,TAN Yi,PEI Jinxin,et al. Improved control strategy for DC fault in modular multi-level converter-HVDC system[J]. Transactions of China Electrotechnical Society, 2018,33(14):3306-3318.

郭小凡.轻型化柔直换流阀等效试验回路及其参数研究[D].北京:华北电力大学,2019.

喻红雨.模块化多电平换流器中子模块电容器结构及材料优化设计[D].重庆:重庆大学,2023.

王李. MMC分布式控制系统及其子模块电容老化均衡策略研究[D].成都:西南交通大学,2023.

郑琳子,祝令瑜,汲胜昌,等.柔性直流输电用金属化膜电容器多频介损在线获取方法研究[J].电力电容器与无功补偿,2020,41(4):63-68.

ZHENG Linzi,ZHU Lingyu,JI Shengchang,et al. Study on online acquisition method of multi-frequency dielectric loss tangent of metallized film capacitor forMMC-HVDC[J]. Power Capacitor & Reactive Power Compensation,2020, 41(4):63-68.

周洋.柔性直流输电用电力电子电容器关键技术研究[D].哈尔滨:哈尔滨理工大学,2018.

胡嘉渝.模块化多电平换流器电容可靠性评估及IGBT模块封装优化[D].重庆:重庆大学,2021.

钱建行. MMC型永磁直驱风电变流器的子模块电容优化方法研究[D].济南:山东大学,2023.

郑媚媚.金属化膜电容器失效物理建模及柔直换流阀组件可靠性评估[D].重庆:重庆大学,2019.

李征南,唐忠,史晨豪,等.基于PCHD模型的MMC-APF无源控制策略[J].电测与仪表,2024,61(2):173-178.

LI Zhengnan,TANG Zhong,SHI Chenhao,et al. Passivity-based control strategy of MMC-APF based on PCHD model[J]. Electrical Measurement & Instrumentation,2024,61(2):173-178.

雷晓燕,曹刚,肖梁乐,等.直流支撑电容器电容介损测量方法研究[J].电力电容器与无功补偿,2026,47(1):50-56. LEI Xiaoyan,CAO Gang,XIAO Liangle,et al. Influence of ambient temperature and applied voltage on the temperature rise and temperature distribution of self-healing power capacitor[J]. Power Capacitor & Reactive Power Compensation,2026,47(1):50-56.

张舟云,徐国卿,沈祥林.新型叠层功率母线在EV电机驱动器中的应用[J].电力电子技术,2005,39(1):53-54, 57,77.

ZHANG Zhouyun,XU Guoqing,SHEN Xianglin. A novel terrace power generatrix used in motor driver in EV[J]. Power Electronics,2005,39(1):53-54,57,77.

张国豪,李化,林福昌,等.金属化聚丙烯膜电容器自愈产气特性与保护技术[J].高压电器,2024,60(6):197-202.

ZHANG Guohao,LI Hua,LIN Fuchang,et al. Study on self-healing gas generation characteristics and protection technology of metallized polypropylene film capacitor[J]. High Voltage Apparatus,2024,60(6):197-202.

项心茹.多端柔性直流电网故障分析与计算方法研究[D].石家庄:华北理工大学,2023.

谢道华.电容器性能与设计计算[M].北京:中国标准出版社,1991.

王祥,徐佩,江龙祥,等.薄膜电容器ESL研究分析[J].电力电容器与无功补偿,2023,44(5):38-42.

WANG Xiang,XU Pei,JIANG Longxiang,et al. Study and analysis of ESL for film capacitor[J]. Power Capacitor& Reactive Power Compensation,2023,44(5):38-42.

齐彦薇. Boost变换器升压电感的优化设计[J].仪表技术,2020(3):15-18.

QI Yanwei. Optimal design of inductors for Boost converter[J]. Instrumentation Technology,2020(3):15-18.

顾伟峰.风电变流器中直流支撑电容的原理介绍及应用与可靠性思考[J].风能产业技术,2018(5):94-100.

夏云发.电容器性能与设计[M].北京:机械工业出版社,1995.

李江胜.叠层母排的技术优势及其应用[J].电子技术与软件工程,2015(5):142-143.

刘栋.叠层母排在矿用变频器上的应用[J].山西焦煤科技,2020,44(12):26-27.

韩旻.强电流脉冲放电技术[M].北京:清华大学出版社, 1989.

张茅山,左强林,倪琰,等.直流支撑电容器的热时间常数计算与验证[J].电力电容器与无功补偿,2026, 47(1):66-71. ZHANG Maoshan,ZUO Qianglin,NI Yan,et al. Calculation and verification of thermal time constants of DC-link capacitor[J]. Power Capacitor & Reactive Power Compensa tion,2026,47(1):66-71.

郭岩,陈立栋,韩旻.脉冲电容器nH级内电感的短路放电测量法[J].高电压技术,2006,32(1):52-53.

GUO Yan,CHEN Lidong,HAN Min. Method of short-circuit discharge measurement for pulse capacitors' inner inductance with nH magnitude[J]. High Voltage Engineering,2006,32(1):52-53.

盖斌,陈炎,赵晓军,等.直流支撑电容器杂散电感测量方法研究[J].电力电容器与无功补偿,2021,42(5):77-82.

GE Bin,CHEN Yan,ZHAO Xiaojun,et al. Study on stray inductance measurement method of DC-link capacitor[J]. Power Capacitor & Reactive Power Compensation,2021, 42(5):77-82.

肖如泉,靳楠松,蒋永梅,等.脉冲电容器微量电感测量的研究[J].电力电容器,1996(2):15-19.

张仁豫.高电压试验技术[M].北京:清华大学出版社, 1982.

浏览量

下载量

CSCD

CNKI被引量

文章被引用时，请邮件提醒。

提交

工具集

关联资源

直流支撑电容器的热时间常数计算与验证

柔直工程用直流支撑电容器缺陷分析与防护

柔性直流输电系统电容器稳态及暂态运行特性研究

直流支撑电容器对壳局放性能的影响因素分析

电容器薄膜专用聚丙烯树脂结晶结构及性能研究